iSpring FP11X50 1 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement, 50-Pack
About this item
- 2.5-Inch by 10-Inch
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 1 Micron
- Fits 10-Inch filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
Frequently Bought Together

iSpring FP11X50 1 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement, 50-Pack


iSpring Universal PP Sediment Filters
Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate.
PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust.
In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.
iSpring sediment filters are compatible with most water filtration systems' housing on the market.
FP11: 10", 1 micron
P15: 10", 5 micron
FP110: 10", 10 micron
FP120: 10", 20 micron
FP25: 20", 5 micron
FP15B: 10", 5 micron
FP220B: 20", 20 micron

Inner Spiral Patternn
Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow.

Multilayered Structure
Sparse Layer: Large particles are filtered to extend the filter life.
Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer.
Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages.

High Quality Material
iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)

- Availability: In Stock
- Model: FP11X50
- Manufacturer: iSpring
Reviews with images
Write Review

2016-02-24
I have a well with bad sulfur and calcium water (water looks like milk coming into the tank reservoir). I use these filters in series after chemical treatment to clear up the water. They take a heavy beating and dont fall apart and the water is clear (1 micron rating is accurate). Due to the build up I have to change the filters every few days depending on water usage so I appreciate the 50-pack at this price.