x

x

Ready to start your business? BECOME A DEALER

EARN UP TO 5% COMMISSION FOR EVERY SUCCESSFUL REFERRAL

Contact us

tanks

iSpring T32M Pressurized Water Storage Tank

iSpring T32M Pressurized Water Storage Tank with with Ball Valve for Reverse Osmosis RO Systems, 4 Gallon

$49.99

About this item

4 Gallon Metal Pressurized Tank with up to 3. 2 Gallon Holding Capacity
Stainless Steel 1/4" NPT Valve Thread
Made from FDA listed, food grade material (Tested by independent third-party to meet NSF/ANSI standard)
Discharges effectively in both vertical and horizontal position
Pre-pressurized between 7-10 psi for common use

Frequently Bought Together

iSpring T32M Pressurized Water Storage Tank with with Ball Valve for Reverse Osmosis RO Systems, 4 Gallon

$49.99

Reverse Osmosis Tank

T32M

How does it work?

iSpring pre-pressurized tanks are perfect for use in under-sink water storage with your reverse osmosis system. The RO process is on the slower side, so a pressurized storage tank is typically required to supply water from the system on demand. Your RO system will fill the tank to capacity, and when you open your RO water dispenser, the water is sent out by the tank's pressurized air bladder.

All tanks have a maximum working pressure of 100 psi.

iSpring Pre-pressurized tanks are tested by independent third party against NSF/ANSI standard (61 for Drinking Water System Components) for material safety and structural integrity requirements, 2018

iSpring tanks have a special surface treatment on the metal body that prevents rust and dent.
All of our metal tanks pass pressure tests before we ship them out to customers.

Unlike traditional plastic, stainless steel that does not break or strip easily is used in our tank valve thread and pressure check valve.
Inside all iSpring tanks, a durable butyl diaphragm with post-cure procedures provides a tasteless and odorless water chamber.

Tank

Water Tank

Availability: In Stock
Model: T32M
Manufacturer: iSpring

Reviews with images

See all customer images

Write Review

Your Name: *

Email *

Your Review: *

Theodore Alva |

2020-10-01

A good suitable replacement for my defective OR Reservoir tank. Bought a second tank to increase storage capacity. Has a female 1/4” NPT on the tank and shut off 90° fitting. Fitting is female 1/4”NPT to 1/4” ID quick disconnect that will receive 1/4”OD hose. Fittings are good quality but my existing hose is 3/8 OD. If I used my existing JG shut off and bought a new JG for the second tank. 1/4 NPT threads are machined nicely so not much Teflon tape sealant was needed. Has a 1/4” Schrader valve to check and add air to it. It states it is pre-charge but I highly recommend checking pressure prior to putting in service. I have a large scale pressure gauge so approximately 1 to 4 pounds and was below spec on both tanks. Was easy to pump up and I added to 10 pounds(PSI) with water side empty each and and turned on. My original tank lasted 5 years but not the same brand as this purchase. So we will see how long that last. Also to add to longevity, maintaining pressure. Be aware diaphragm is a moving part when it’s discharge water and being refilled. Found label on them, made in Taiwan and is ISO 9001 with a CE certified 0035.

11

>
>>

How to use

Warranty Registration & Help Center

support-Warranty-registration

support-live-chat

support-ticket

support-email

Tell us about your shopping experience

support-amazon

support-home-depot

support-lowes

support-gmail